Refractories

This silica-based refractory is designed for lining coreless induction furnaces. Uses include the low-cost melting of gray, ductile and malleable iron in all types of iron foundry operations. MINRO-SIL^® may also be used for selected high temperature nonferrous applications.

Packaged In: 55-lb multi-wall paper bags stacked 64 to a pallet.

DRI-VIBE^® LGS is a large grain product designed for coreless induction furnaces. This silica-based product, with its tightly controlled grain size, can increase the furnace lining life by up to 20%.

Packaged In: 55-lb multi-wall paper bags stacked 64 to a pallet.

Many high strength compositions available utilizing alumina-based aggregates.

Packaged In: 55-lb multi-wall paper bags stacked 64 to a pallet.

DURACON^® 28 is a low cement castable that exhibits excellent strengths, refractoriness, and resistance to carbon monoxide attack. This mix is designed to be cast with either internal or external vibration. Applications for this product include car tops, boilers, incinerators, furnace covers and applications where carbon monoxide disintegration is a concern. This product can also be used as a general purpose, high-strength dense 45 - 50% alumina castable.

Packaged In: 55-lb multi-wall paper bags, stacked 64 to a pallet.

RAM MAX^® 75 P BLUE is a mullite based high alumina phos-bonded plastic. This pure mullite design offers superior volume stability and thermal shock resistance, as well as good strengths through a broad temperature range. This product is blue in color.

Packaged In: 55-lb cartons with plastic liners, stacked 60 per pallet.

REDIGUN is a family of gunning plastic. The plastic gunning process provides a high-density monolithic lining comparable to rammed plastic at a much faster and consistent installation rate.

Packaged In: 55-lb cartons with plastic liners, stacked 60 per pallet.

VIB-RAM 70 is a high alumina, mullite based phos-bonded vibrating plastic. This design is intended for installation using external form vibration or ramming. The mullite base of this product provides good strengths, thermal shock resistance, and volume stability. VIB RAM 70-P can be rammed or vibrated in place

Packaged In: 55-lb cartons with plastic liners, stacked 60 per pallet.

A high strength, abrasion resistant castable with exceptional thermal shock properties. Designed for flooring applications which are exposed to metal splash and extreme heat. TUFFLOOR^® is resistant to dross, hot slag, skim and molten metal splash.

Packaged In: 55-lb multi-wall paper bags stacked 64 to a pallet.

GROUT 663A is a fused alumina-based refractory troweling mix approved for application to the inside face of coreless induction furnace coils. Benefits include being electrically insulative for application between induction coils, excellent troweling properties and can be used as an entirely new coil coating or patch for existing coatings.

Packaged In: 55-lb multi-wall paper bags stacked 64 to a pallet.

GROUT 763AF is a fused alumina-based refractory troweling mix approved for application to the inside face of coreless induction furnace coils. The product has the same benefits as GROUT 663A. It has an organic fiber addition to minimize dry-out time and can be used as an entirely new coil coating or patch for existing coatings.

Packaged In: 55-lb multi-wall paper bags stacked 64 to a pallet.

RAM MAX^® 65 P SEAL is an alumina based phosphate bonded refractory seal. The design is recommended for patching existing refractory linings with a thin coating. It can also be used as a protective covering.

Packaged In: 55-lb pails.